we are recruiting

PSM home of level, pressure, density & Flow measurement and control Level ~ Pressure ~ Density ~ Flow ~ Measurement ~ Monitoring  ~ Control Contact details for our key staff Download drawings, datasheets, manuals, certification and questionnaire forms Tell us what you think about our Company, products and site Product support, repairs and service information Come and see what we've been up to Use a keyword search throughout our site
'LST' Latching Water Level Alarm / Indicator
Immediate visual warning of possible hazards caused by flooding

Key Benefits

Immediate visual warning

Safe for use in hazardous areas

No power requirement

Optional Switched output for remote alarming

The LST Device provides a simple robust and reliable solution where an immediate visual warning is needed of possible hazards caused by flooding. Intended for use in areas which are normally unmanned and only visited infrequently. The LST provides a warning that a flood condition has occurred and subsequently passed.

Initially conceived and now successfully applied to protect 1000’s of underground high voltage sub-stations the high visibility float will automatically rise with incoming floodwater and then latch at the highest recorded level. The operator is immediately informed of the risk to switching gear and other plant, avoiding a repeat of past accidents where plant has been damaged by operating it whilst contaminated and in worse cases operators have been electrocuted.

 

View and download datasheed in PDF format

press release

View and download datasheet in PDF format

Request a datasheet through the post

Water level alarm

An optional electronic sensor module (ESM) may be fitted at any height on the water level indicator. The float has an embedded magnet and in a flood condition will activate a reed switch in the ESM Providing a contact closure which can be used to trigger local or remote alarms. 

Many unmanned locations now have telemetry monitoring of the plant and can be used to send an alarm message to central offices.

Resetting the float is simple—the entire inner rod assembly is simply withdrawn from the outer tube which remains in place. The purpose designed float has two sprung loaded reset levers

which allow it to be slid down to the low level. The rod assembly is then re-inserted and top and bottom locations ensure it is positioned correctly.

 

The Sight Tube is simply mounted to a vertical surface using brackets provided. SPECIFICATIONS

water level alarm

1 – Clear Acrylic tube 60 x 60

2 – Float assembly with reset levers

3 – Electronic sensor module

4 – Ratchet rod – 15mm increments

5 – Top end cap - removable

6 – Knob for withdrawal

7 – Holes for water access

8 – lower end cap - fixed

9 – Securing screw for ESM

Back    

Information Request Form

Select the items that apply, and then let us know how to contact you .

Send product literature
Send company literature
Have a salesperson contact me

Please keep me updated with latest news and product developments

How did you find us
Any Comments
Name
Title
Company
Address

E-mail
Phone

Fax

Send mail to webmaster@psm-sensors.co.uk with questions or comments about this web site.
Copyright © 1997 PSM Instrumentation Limited
Last modified: August 15, 2007